Monday 23 January 2017

How Many Walkie-Talkies Can Operate on the Same Channel?

Theoretically, you can use an unlimited amount of walkie-talkies on the same channel (although in practice you might experience a few problems if you took that suggestion literally). Basically, there isn’t really a set limit. You could use as many as you like provided they are set up correctly. Anybody set to the right channel and in range at the time of transmission would then be able to pick up the signal and respond to it.

Most radios have access to 8 channels. These channels each have 38 separate ‘identification tones’. The user sets his/her channel up with the desired tone and then only other users who know the channel/tone will be able to hear the transmissions. As a result, there are, in any given area, about 304 different combinations, so signal interference is unlikely to affect you.



Please do not interpret this answer as saying that your radio has access to 304 possible channels. It does not. It will likely only have access to 8. Some less reputable manufacturers tend to falsely imply access to 304 channels; this is simply not the case. You will have access to 304 possible tone/channel combinations, that’s all.

To better explain the CTCSS codes and how they work; we’ll include a little information from Amherst.co.uk’s FAQ page.

“CTCSS stands for "Continuous Tone Coded Squelch System". These codes are also often called "Privacy codes" If a CTCSS tone is selected; a CTCSS sub-audible tone is transmitted along with the regular voice audio by the transmitting radio. The receiving radio, set to the same CTCSS tone, will only receive audio if it contains that sub-tone. Interference from other users on the same frequency is therefore rejected (unless they are also on the same sub-tone). This is a way of allowing groups of users of walkie-talkies on the same channel to avoid hearing messages from other nearby users”.

So, in conclusion, you can probably use as many walkie-talkies as you like on the same channel. As long as the units in question are of the same type (either VHF or UHF) and have the same CTCSS setup, then you simply shouldn’t have a problem. You also shouldn’t suffer from signal interference due to other users (although you may still experience signal loss/interference/degradation from other sources). We have talked about combating signal loss elsewhere, so please see the other questions if you have any problems in this area.

Friday 13 January 2017

Motorola Solutions’ digital two-way radio technology enhances mission-critical communications at Munich airport

Motorola solutions are a company well known for their robust two way radios and for building world class communication structures. Improving on the current TETRA system with an IP dispatch console and piloting the WAVE system, that allows a phone app to connect to the radio system, for communicating of site. You can read more about what Motorola are doing for Munich below and you can find the original article here.

Motorola Solutions has received an order to implement a comprehensive update and extension of its existing TETRA digital two-way radio system at Munich Airport.

The newly modernized communications infrastructure ensures greater connectivity, interoperability and collaboration between various business and operational functions at Germany’s second largest airport. Motorola Solutions will also provide services for ensuring smooth operations.



Within the framework of the TETRA radio network refresh, Motorola Solutions is equipping the airport with a new MCC 7500 IP Dispatch Console. The comprehensive, scalable solution enhances the IP architecture to ensure optimum call set up and availability. It will also allow Munich Airport to expand its communications infrastructure in the future without interrupting existing services. As well as this, Motorola Solutions will implement two TETRA base stations for improved TETRA radio coverage in the terminal buildings.

Alongside the improvements to the TETRA system, the airport has started a pilot project for the potential introduction of Motorola Solutions’ broadband push-to-talk (PTT) platform WAVE. The goal of the installation is to ensure that airport staff can communicate, no matter which device or infrastructure is being used. The powerful PTT solution WAVEâ„¢ Work Group Communications provides airport authorities with secure and reliable communications beyond TETRA radio â€" including broadband devices and networks â€" to enable greater workforce connectivity, interoperability and collaboration. WAVE connects the TETRA system used by administrative staff with service management employees who join the broadband platform via smartphones, computers, other radios or telephones, meaning that staff across the airport can communicate with one another from virtually any location.

“We have been working with Motorola Solutions’ TETRA two-way digital radio system since 2007,” said Michael Zaddach, head of the IT service division at Flughafen München GmbH. “The update of our TETRA infrastructure enables us to further improve our communications in airport operations and make our processes even more efficient.”

“We are collaborating closely with Munich Airport to provide a future-proof TETRA digital two-way radio network,” said Klaus-Dieter Drossel, sales director for key accounts, Motorola Solutions Germany GmbH. “We are also pleased that Munich Airport is testing our broadband push-to-talk platform WAVE, and we are certain that it will enable airport staff to work together more closely, no matter which device or network they use.”